The instrument shown is the Series 7000 Multifunction Fuel Monitoring System. It combines a digital LCD Engine Hourmeter, Tachometer, Fuel Flowmeter, and Fuel Totalizer in a singel 3-3/8" diameter instrument which fits the panel space of a standard tachometer. The instrument also incorporates an Engine Synchronizer Indicator.

The Series 9000 System has the same features as the 7000 PLUS the addition of a Nautical Miles-per-Gallon over the ground. The speed signal required to calculate the MPG reading is obtained from GPS and Loran systems with a NMEA 0183 serial port output. This feature provides the captain with a powerful new tool to set optimum fuel efficiency under all conditions and determine how far he can go on the remaining fuel.

Additional Features:
Models for single diesel engines from 80HP to 3000HP
Simultaneous, display of Engine Hours, RPM, GPH and Total Gallons Used
Dual color back-lighting of LCD enhances night vision
Microprocessor controlled electronics w/two stage adjustable calibration of GPH

TWIN SCAN
Engine Instrumentation

TWINSCAN ™ Instruments embody a new concept in twin engine analog instrumentation which sets the ultimate standard for easy readability in the least possible space. Each individual instrument contains port and starboard meters which reference to each other. In a single, quick glance the eye can scan the entire instrument panel for non-matching pointers that signal possible trouble. Potentially dangerous and costly engine problems that might go unnoticed on conventional instrument panels are highlighted on a TwinScan ™ panel.

TWINSCAN ™ instruments reduce the panel space required by 50% leaving more room for other electronics. A new patented miniature meter movement design is the first to allow two meters to fit in the industry standard 2" diameter case which significantly reduces overall installation time. Images of instruments shown here are relative sizes.

	Deluxe Features:
	Internally illuminated pointers for effective night visibility
	Black on White, or White/Red on Black; U.S. & Metric
	Corrosion free stainless bezel (black, white or polished)
	Molded acetal cases are standard 2-1/8" & 3-3/8" dia.
	2" gauges have 140° sweep w/ linear scales; superior to 90°
	Reverse polarity & load dump protection exceeds SAE J1810
	Tach/ MPG/ Sync Indicator uses an NEMA 0183 speed signal from a GPS or Loran, and a fuel flow signal from a TwinScan GPH instrument to digitally display Fuel Efficiency or the RPM difference between port and starboard engines
	High-low level electronics controls for separate external alarm lights/horns for water temp and oil pressure
	User resettable alarms
	The pointer shaft and a warning light in the hub flash when alarm level is exceeded
	Microprocessor electronics for high performance features like electronic dampening, linear dial scales, superior accuracy unaffected by ground voltage shifts

Last Modified

| Home || Products || Engine Sales || Service || About Us || Contact Us || Links |

Optimized for Internet Explorer 3.0 and Netscape Navigator 2.0 and above.
Best viewed at resolution 1024x768 / 16-bit High-Color.

© Copyright 1998 Performance Diesel, Inc. All rights reserved.

Designed and developed by MGC